The IZOTERMA heating panels system is the instant and reliable heating in the specified time and place. Infrared radiant panels give back their energy perpendicular to their plane, no matter in what position the panels are mounted (vertically or horizontally). It is characterized by the high intensity of the heat energy, achieved by using the special IzoQuartz® coating on the panels surface.

Application: accommodation rooms, offices, social, production, gastronomic rooms, auditoriums, cameral lecture (show) halls, shops, counting offices, work cubicles, e.g. cash registers, spot heating of the official's station (under the desk), sacral buildings, churches (installed in the pews). Constant and temporary people occupied rooms. Installed directly on the wall, ceiling and suspended coffers, as well as in the high industrial, trade, breeding buildings and in the mobile barracks. Bars, restaurants, cafe gardens, umbrella roofs.

ADVANTAGES:

• New technology – the highest efficiency and energy saving
• Instant heat in the given time and place
• Easy to instal. System may be expanded in stages – according to needs
• Possibility of heating the separated work stations and communication routes
• Panels do not occupy the room space, are composed in the surrounding
• Maintenance-free, energy-efficient, vandal-resistant

Our series of radiant panels type S

Type S 230 V	Output W	Dimensions - mm			Weight kg
		thick.	width	lenght
S - 300	300	26	592	592	5,0
S - 600	600	26	592	1192	8,8

Construction of radiant panels - the heating panel has the box structure made of zinc-coated steel sheet, painted, heating element, insulation, installation element, front panel surface coated with the special IzoQuartz® preparation, which increases the heat radiation efficiency. Backside of the panel is fitted with a 0,5m long connecting cable 230V. The panel backside has four handles for instalation frame. Colour - white.



PANELS INSTALLATION

	Fixed to the ceiling or wall The installation frame is fixed with the bolts directly to the ceiling. The heating panel is hanged on the frame, as shown inthe illustration.
	Built in the suspended ceiling in the coffers The heating panels have the same dimensions, as the standard suspended ceiling panels, which allows for the direct installation on the ceiling grid, between the panels.
	Under the ceiling, hanging on the hangers (chains) The panel backside has four handles. The panel is hanged on four chain pieces, using the mentioned handles.
	The minimum distances to maintain apply to the horizontal panels: H = 2,4 m B = 0,6 m (above values do not apply to industrial and agricultural applications)

Designing output and number of radiant panel - it is important if radiant panels are to serve as the main source of heating or just support the already existing one - complementary heating. The required output for individual rooms depends on: the desired room temperature, thermal insulation of walls, widows and the outside temperature. Approximately one can assume the following types of building construction and the demand for heating power, assuming the minimum outside temp. - 20 ° C:
1. 20 W/m³ - wooden buildings, well insulated
2. 25 W/m³ - brick buildings with insulation (polystyrene, mineral wool)
3. 30 ÷ 35 W/m³ - brick buildings without insulation (old building)
4. 5 ÷ 20 W/m³ - by complementary heating

Radiant panel	Output W	Room hight - 2,6 m
		One external wall	Two external walls	Three external walls	Four external walls
type S-300	300	up to 6 m2	up to 5 m2	up to 4,5 m2	up to 4 m2
type S-600	600	up to 12 m2	up to 10 m2	up to 9 m2	up to 8 m2

CONROL
The panels are turned on by the switch (ON / OFF), or by the temperature controller. Switch, temperature controller or time clock may be located in any place or room. Each heated room should have the separate temperature control. The controller should be installed 1,5 – 1,8 m above the floor, in a location without draughts and direct sunlight.